MICROSHADES DECKING

CONTEMPORARY MINIMAL VERTICAL LINES OF CRAFTMANSHIP, MAKING EVERY AREA FEEL LARGER & COMPLETE

MICROSHADES DECKING

CONTEMPORARY MINIMAL VERTICAL LINES OF CRAFTMANSHIP, MAKING EVERY AREA FEEL LARGER & COMPLETE

Contact our expert sales team sales@timberireland.ie

+353 1 8427669

MICROSHADES BASERAIL

MSD05
32x69x4200mm

13.65 per length + VAT

Price based on 4200mm length

3.25 per Linear metre +VAT*

*PRICES ARE GENERAL GUIDELINES, HOWEVER, MAY BE SUBJECT TO CHANGE WITH FLUCTUATIONS IN MARKET PRICES & AVAILABILITY
Wastage Allowance

Please ensure when ordering that you make an allowance for wastage. We recommend adding an additional 10-15% over and above your initial requirements.

Looks Different, Because It Is Different!

Profiles and sizes within the Microshades Cladding Range

A great cost-saving timber

MicroShades® Treated Wood Products provide the beautiful, rich wood tones of natural redwood and cedar, along with the durability and protection of MicroPro® technology.

Microshades is treated timber which has had a colour added to the treatment. We offer a colour pigment that leaves treated softwoods with a very attractive hardwood tone. 

BENEFITS OF MICROSHADES TIMBER

  • Retains its rich colour for longer
  • Colour will deepen over time.
  • Little or no maintenance required
  • Sustainable, and Greenguard certified (VOC) for schools
  • Added protection against insects by wood boring beetles or termites
  • Protection against fungal decay
Looks Different, Because It Is Different!

Microshades Process

WHAT IS MICROSHADE?

Microshades is a brand name for timber that has been preserved by the correct application of an Osmose, Microshades wood preservative. Application of the micronized copper preservative is carried out in a controlled treatment process using vacuum pressure impregnation, in accordance with BS 8417. Treated micronized timber is protected against wood-rotting fungi and wood-destroying insects.

NEW TECHNOLOGY

Unlike current preservative formulations, MicroPro technology introduces the copper into the timber cells in a micronized solid format. This results in a premium preservative which is ideal for use in residential and commercial environments were aesthetic and environmental standards are paramount.

 

APPEARANCE

When micronized timber is freshly treated it is lighter in colour than traditional treated timbers. It has the unique advantage of weathering to an attractive honey tan shade before going driftwood grey. The lighter colour benefits subsequent painting and staining.

 

ENVIRONMENTAL

Microshades timbers are setting a new benchmark in environmental timber procurement. Also, Microshades timber products are certified by the Greenguard Environmental Institute for use in schools, playgrounds, offices and other sensitive environments. More information available on www.greenguard.org

MICROSHADES DECKING BASERAIL

MICROSHADES DECKING BASERAIL

Profile
CODE
Depth
mm
Width
mm
Length
mm
Price
ex VAT.
RAIL MSD04 40 69 4200 € 21.00
BASE RAIL MSD05 32 69 4200 € 13.65
INFILL – MSD06 10 41 4200 € 10.50
SPINDLE MSD07 41 41 900 € 1.95
← SWIPE LEFT TO VIEW FULL TABLE ON MOBILES
 
MicroShades®
Classic Brown New

No Weathering
MicroShades®
Classic Brown
Weathered 10 Months
Untreated
Redwood
Weathered 10 Months
Untreated
Cedar
Weathered 10 Months

Working Properties

 

Effective Use of Preserved Wood Micronized timber, treated to an appropriate specification, can be used for structural timber, sole plates, garden furniture, playground equipment, patios, decks, fencing, garden edging, and landscaping controlled treatment process structures such as pergolas.

Cutting

Preserved wood should not be cut or otherwise reworked as this will expose unpreserved wood. If cutting cannot be avoided then precautions should be taken when using high-speed cross-cut saws or mechanical sanders. Any surface exposed by drilling or cutting must be retreated with a cut end preservative. Failure to do this will reduce the effectiveness of the preservative.

ASSEMBLY GUIDE FOR MICROSHADES FENCING

Installation

In decking, and as a general rule, nail boards bark side up (annual rings are upward) to reduce splitting; however, the best face should be placed up when a defect of the wood is apparent. Fasten thin boards to thicker boards to maintain structural integrity. It is a good idea to drill pilot holes for your fixings when screwing near the edge or end of a board. This will minimise splitting. If the wood has become wet by exposure to rain, butt decking boards together during construction. As drying occurs, some shrinkage can be expected. If the wood is dry, space the boards to allow for expansion in wet weather.

Gluing

Micronized timber can be glued with most commonly used adhesives once dry. Always follow the adhesive manufacturer’s recommendations.

Fasteners and Hardware

Certain metal products (including fasteners, hardware and flashing) may corrode when in direct contact with wood treated with copper-base preservatives. To prevent premature corrosion and failure it is important to follow the recommendations of the manufacturers for all metal products. For exterior applications, use fasteners and hardware that are in compliance with the manufacturer’s recommendations and the building codes for their intended use. As with any good design and construction practices, Micronized timber should not be used in applications where trapped moisture or water can occur. Where design and/or actual conditions allow for constant, repetitive or long periods of wet conditions, only stainless steel fasteners should be used.

Finishing

If you desire to apply a paint, stain, clear water repellent, or other finish to your preservative treated wood, we recommend following the manufacturer’s instructions and label of the finishing product. Before you start, we recommend you apply the finishing product to a small exposed test area before finishing the entire project to can ensure it provides the intended result before proceeding.

Disposal

Micronized timber that is no longer usable, such as off-cuts, broken boards, sawdust or preserved wood material is taken out of service, must be disposed of in accordance with national waste regulations.

DELIVERY TERMS & CONDITIONS

Our delivery times are Mon – Fri: 8am – 5pm excluding weekends and bank holidays.

We deliver material from our fleet of transport, we also use external haulage companies.

DELIVERY CHARGES AS FOLLOWS:

PALLET SPACE
( PER 4 FOOT)
4′ 8′ 12′ 16′ 20′
DUBLIN NORTH 50 50 50 50 50
DUBLIN SOUTH 50 65 65 65 65
LEINSTER
(OUTSIDE DUBLIN)
50 100 150 150 250
MUNSTER 50 100 150 200 250
CONNAUGHT 50 100 150 200 250
ULSTER 50 100 150 200 250

ALL PRICES QUOTED ARE € PRICE +VAT | 4′ pallet space = €50 + VAT

← SWIPE LEFT TO VIEW FULL TABLE ON MOBILES

 

CONDITIONS

If any items you order are not available we will contact you and discuss how you wish to proceed. This will be via your provided telephone number or email address.

Deliveries will not be made where the ground condition is uneven, not suitable to unload or likely to cause damage to any of our vehicles.

We will not leave products on public property unless written consent is provided by the relevant authority confirming agreement of delivery to location.

A signature is required on delivery. However, goods can be left without being signed for when a prior arrangement has been made between Timber Ireland and the customer.

Timber Ireland will not accept responsibility for goods which are lost or stolen after they have been delivered in accordance with any prior arrangement.

Deliveries are to kerbside only and orders will be cancelled if the delivery vehicle is unable to safely access the delivery address.

RETURNS & CANCELLATION

Please keep your invoice for anything you buy from us. It will ensure we can help you, if you wish to return goods, the product must be unused and in resale condition.

Returned goods are subject to a 15% restocking charge.

Orders which are cut, machined or made to measure to your requirements will not be exchanged or refunded. We reserve the right to refuse a return or to require proof of identity.

OTHER RELATED CEDAR DECKING PRODUCTS

TO COMPLETE YOUR PROJECT

Timber
Substructures

Plastic
Substructures

Plastic Adustable
Pedestals

Protective
Oils & Stains.

Nationwide Delivery

We at Timberireland.ie & PanelDepot.ie carry a stock range from all the major manufacturers with next day delivery and no minimum order.
  • Delivery Fleet to cover all counties in Ireland
  • Next Day Delivery Service
  • Competitive Delivery Rates
  • We adopt an environmental friendly policy on our services

+00353 1 842 7669

We believe we have the best team within the industry who are motivated and passionate about service and can deliver solutions for our many customers.

CEO, Keith McMahon