Ready Made-Kit – Willow Fences Screen Panels coupled with Black Antracite Concrete Posts. All the parts needed to create this exquisite fence structure are indicated below.

Qty 1 – 1800 x 1800mm – Natural Willow Panel

Qty 2 – 100 x 100 x 3000mm Antracite Concrete Posts

Qty 4 – Stainless Steel panel assembly clips (1 pack)

Qty 2 – Concrete Fast Set Packs (1 pack per post hole)

Qty 1 – 35 x 240 x 2240mm Concrete Black Antracite Base Panel 

These willow screens can be used as a fence in combination with climbing plants. These willow screens emphasize the natural look of your garden perfectly! 

Willow screen Evilios is the most sturdy variant in our range. The willows are braided around sturdy steel tubes. The garden screen is then fitted with a wooden frame of 7×7 cm. The green color of the willows will turn a nice brown over time.  

Assembly of Natural Willow Fence Panels.

1. Set the chosen markings of your fence dimension out in the desired location.

2. Depending on the desired finished height of the posts, dig post holes to suit your chosen fencing spacing. Ensure Posts are at a minimum of 1800mm at finished height

Cement is required when erecting fences or verandas to secure the foundation. For example, quick cement is also called speed mix, or quick concrete and is used to firmly place fence posts in the ground. But also for securing concrete bases for wooden structures.

The advantage of fast concrete is the fast drying time. Rapid cement has already hardened within about 15 minutes.

Using quick cement is very simple. It can be applied as follows:

• Dig a hole about three times wider than the head size of the fence post;
• Secure the post in the correct position in the hole; ensure the posts are in 90-degree vertical position all around.
• Fill the hole halfway with cement and fill the rest with water.